Product Description

* Originally designed for use on externally heated/cooled tanks and vessels. Other uses include heat exchanged surfaces, clamp-on coils, instrumentation temperature control, electrical heating tape, and aluminum surfaces. Can be easily removed and will withstand expansion and contraction cycles. * Application: By hand trowel or pumping methods. Surface does not have to be rust free. However, previously corroded surfaces should be evaluated before applying TRACIT cements. Once applied, these non-hardening mastics act as a corrosive barrier. Cement can be warmed to *5°F for easier application. Apply a layer approximately 1/8" thick. When used on plate coils, excess will ooze out sides while leaving a coating between coil and tank to fill air voids. * Curing: None required. * Minimum temperature for application: 5°F * Maximum usage temperature limits: **5°F (**1°C) * Minimum usage temperature limits: ***6°F (**0°C) * Thermal conductivity: ****5 BTU in/hr/sq. ft°F * U range: ****0 BTU/hr sq. ft°F * Shelf life: **5 years * Net weight: *2 lbs/gal. * Soluble: No * Harmful vapors: None * Bonding strength: N/A * Usable life of product: Indefinite; will perform for the life of the installation. * Typically a stock item * Tracit****0A should be requested when application is being done by pump.